Merritt 38.5' Multi-Purpose Conveyor Trailer for Fertilizer, Seed or Grain

• Sloping ends make easier access to platforms
• 116" of swing clearance provides greater tractor maneuverability and better load transfer capability.
• 36' interior bridge potential,allowing for 80,000 lb.gross when coupled to a tractor with a 206" or greater wheel base
• The strongest aluminum design - Merritt's heavy duty posts riveted (not welded) to .063 side sheets.
• Easy opening doors - fully opened or closed in fewer than 4 revolutions.
• 68" sides for increased capacity.
• Ground clearance of 25" - great for ag use and swing-away augers.
• Hoppers are .125" thick material with vertical stiffeners.
• White aluminum .063" baked enamel finish.
• Corrosion resistant mylar barrier separates all aluminum from contact with steel.
• Merritor Wabco premium ABS 4S-2M.
• Sealed wiring harness with internal grounding.
• Two rows of three lights per side.
• 22,500# axles,5" round with automatic slack adjusters.
• Single leaf springs.
• Rapat 24 " x 26' stainless steel incline conveyor with stainless steel skirting and hydraulic motor and lift cylinder.
• Rapat 18" x 17' stainless steel horizontal conveyor with stainless steel skirting and hydraulic motor.
• Agri-Cover roll tarp with 7" aluminum end caps (electric or manual).
• 25 HP Honda power pack and hydraulic pump
• Vibrators on front and rear slopes (Optional)
• Air-ride suspension (Optional)

Dimensions:

Length:	38'6"
Width:	96"
Side Wall Height:	68"
Number of Hoppers:	2 or 4
Hopper Clearance Empty:	25"
Cubic Capacity (Heaped):	1,323
Heaped Bushels (Approximate):	1,053
Swing Clearance:	115 13/16"
King Pin Setting:	18"
Hopper Slope - Side:	40 degree
Upper Slope:	33 1/2"
Estimated Weight:	8,600 lbs.*

Within eight 10-hole uni-mounted steel wheels and 8.25" x 24.5" Yokohama tires