Dimensions:
38.5' MVT
| Length: |
38'6" |
| Width: |
96" |
Side Wall Height: |
68" |
| Number of Hoppers: |
2 or 4 |
| Hopper Clearance Empty: |
25" |
| Cubic Capacity (Heaped): |
1,323 |
| Heaped Bushels (Approximate): |
1,053 |
| Swing Clearance: |
115 13/16" |
| King Pin Setting: |
18" |
| Hopper Slope - Side: |
40 degree |
| Upper Slope: |
33 1/2" |
| Estimated Weight: |
8,600 lbs.* |
Within eight 10-hole uni-mounted steel wheels and 8.25" x 24.5" Yokohama tires
|
• Sloping ends make easier access to platforms.
• 116" of swing clearance provides greater tractor maneuverability and better load transfer capability.
• 36' interior bridge potential,allowing for 80,000 lb.gross when coupled to a tractor with a 206" or greater wheel base
• The strongest aluminum design - Merritt's heavy duty posts riveted (not welded) to .063 side sheets.
Easy opening doors - fully opened or closed in fewer than 4 revolutions.
• 68" sides for increased capacity.
• Ground clearance of 25" - great for ag use and swing-away augers.
• Hoppers are .125" thick material with vertical stiffeners.
• White aluminum .063" baked enamel finish.
• Corrosion resistant mylar barrier separates all aluminum from contact with steel.
• Merritor Wabco premium ABS 4S-2M.
• Sealed wiring harness with internal grounding.
• Two rows of three lights per side.
• 22,500# axles,5" round with automatic slack adjusters.
• Single leaf springs.
• Rapat 24 " x 26' stainless steel incline conveyor with stainless steel skirting and hydraulic motor and lift cylinder.
• Rapat 18" x 17' stainless steel horizontal conveyor with stainless steel skirting and hydraulic motor.
• Agri-Cover roll tarp with 7" aluminum end caps (electric or manual).
• 25 HP Honda power pack and hydraulic pump
• Vibrators on front and rear slopes (Optional)
• Air-ride suspension (Optional) |
